ASAB DP33 - Diaphragm Airless Sprayer Range (Electric, Petrol & Diesel)

ASAB DP33 Diaphragm Airless Sprayer Range (Electric, Petrol & Diesel)

Introducing the ASAB DP33 range — our XX-Large job diaphragm airless platform built for commercial, daily/regular usage where output, hose reach, and reliability are the priority. With a high-production system capable of spraying up to a 0.033" tip and running out to 90m of hose, the DP33 is made for big coverage, thicker coatings, and serious site productivity.

The DP33 platform is available in three power options so you can match the machine to the job site: Electric (240V) for clean indoor work, Petrol for remote sites, and Diesel for fleet/plant environments where diesel is standard.

Key Benefits (All DP33 Models)

Suitable for XX-Large Jobs – Commercial – Daily/Regular Usage
High output 3.2 L/min diaphragm performance
4000 PSI max pressure for consistent atomisation under load
Runs up to a 0.033" max tip for high production spraying
Max hose length 90m for serious reach and site efficiency
Available in Electric 240V / Petrol 7HP OHV / Diesel 7HP OHV
Built tough for commercial job site conditions
Backed by ASAB 3 Year Warranty

Specifications (DP33 Platform)

Max Flow Rate: 3.2 L/min
Max Pressure: 4000 PSI
Max Tip Size: 0.033"
Max Hose Length: 90m
Power (Platform Rating): 2.6 HP
Configuration: Trolley

What’s Included (All DP33 Models)

ASAB GHB818 Airless Gun with Tip Guard & 515 tip
15m Double Braided Nylon Airless Paint Hose
Flexible Suction with Suction Filter
Stand Configuration
125ml ASAB Piston Lube
125ml ASAB Pump Saver
Hose Tie
Tool Kit
25 Month Warranty

Safety Check

• Depressurise before servicing: Prime/relief on, trigger into a waste bucket, confirm pressure is at zero.

• Injection hazard: Never check leaks with your hand—use cardboard/rag and keep clear of pressurised joints.

• Hose/fitting ratings: Ensure all hoses and fittings are rated to the machine pressure and in good condition before pressurising.

• Electric (DP33E): Isolate power before service; keep electrics dry; use RCD protection.

• Petrol/Diesel (DP33P/DP33D): Refuel only when engine is off and cool; run in ventilated areas; beware hot exhaust and moving parts.

• Pressure test gradually: Start low, check for leaks, then increase to operating pressure.

ASAB – Engineered for Performance, Built to Last.