Introducing the ASAB HPF12 Swivel Elbow — engineered to deliver a secure, high-pressure 90° connection while allowing controlled swivel movement to reduce hose twist and fitting strain. Designed for professional airless spray systems, this fitting is ideal where tight spaces, cleaner hose routing, and long-term sealing reliability are critical.
Rated to 5000 PSI, the elbow configuration helps manage hose direction without forcing bends that can kink or fatigue the line. The swivel action allows the connected hose or accessory to rotate naturally during operation, reducing stress on threads and sealing surfaces and helping maintain stable pressure delivery under load.
Whether you’re improving hose routing at the gun, adding flexibility to a whip line, or replacing a worn fitting, the ASAB-F-HPF12 is a job-site-ready solution for high-pressure airless work.
Key Benefits
-
Rated to 5000 PSI for high-pressure airless applications
-
90° swivel elbow for improved hose routing in tight spaces
-
1/4" Male x 1/4" Female configuration for common high-pressure connections
-
NPT thread for secure, tapered sealing on compatible high-pressure fittings
-
Swivel design reduces hose twist, kinking, and fitting strain
-
Supports consistent sealing integrity during movement
-
Heavy-duty construction for commercial job site use
What’s Included
-
ASAB 5000 PSI Swivel Elbow 1/4" M x 1/4" F (NPT) — ASAB-F-HPF12
Safety Check
-
Depressurise fully before fitting changes: Switch to prime/relief, trigger the gun into a waste bucket, and confirm pressure is at zero.
-
High-pressure injection hazard: Never check leaks with your hand — use cardboard or a rag and keep clear of pressurised joints.
-
Match thread types correctly: Confirm all mating components are 1/4" NPT (do not mix NPT with BSP/NPSM).
-
Pressure rating matters: Ensure all connected hoses and fittings are rated to 5000 PSI or higher.
-
Inspect threads and sealing faces: Replace damaged components — cracked or cross-threaded fittings can fail under pressure.
-
Pressure test gradually after installation: Start at low pressure, check for leaks, then increase slowly to operating pressure.
ASAB – Engineered for Performance, Built to Last.