ASAB High Pressure Fittings #18 - "T" | 1/4"F x 1/4"F x 1/4"F | 7250psi

Part Code: ASAB-F-HPF18

Introducing the ASAB HPF18 T-Piece — built for high-pressure airless systems where you need a compact, reliable three-way split without sacrificing sealing integrity. Designed for professional setups, this heavy-duty tee fitting is ideal for manifold builds, gauge take-offs, accessory branching, or splitting to a secondary line where strength and stability matter.

Rated to 7250 PSI, the tee configuration lets you distribute pressure cleanly across multiple components while keeping the connection point neat and serviceable. It’s a ripper option when you need an extra outlet for a gauge line, a second hose run, or a tidy junction in a custom rig — all while maintaining consistent pressure delivery under load.

Whether you’re building out a small manifold, adding a gauge port, or replacing a worn junction that’s started weeping under pressure, the ASAB HPF18 is a job-site-ready solution for serious high-pressure airless work.

Key Benefits

• Rated to 7250 PSI for high-pressure airless applications

• "T" configuration for efficient three-way hose or accessory routing

• 1/4" Female x 1/4" Female x 1/4" Female for common high-pressure plumbing layouts

• NPT thread for secure, tapered sealing on compatible high-pressure fittings

• Ideal for manifolds / gauge lines / secondary outlets where a compact junction is needed

• Helps keep setups tidy and serviceable, reducing messy hose routing

• Heavy-duty construction for commercial job site use

What’s Included

• ASAB 7250 PSI Tee 1/4" F x 1/4" F x 1/4" F (NPT) — ASAB-F-HPF18

Safety Check

• Depressurise fully before fitting changes: Switch to prime/relief, trigger the gun into a waste bucket, and confirm pressure is at zero.

• High-pressure injection hazard: Never check leaks with your hand — use cardboard or a rag and keep clear of pressurised joints.

• Match thread types correctly: Confirm all mating components are 1/4" NPT (do not mix NPT with BSP/NPSM).

• Pressure rating matters: Ensure all connected hoses and fittings are rated to 7250 PSI or higher.

• Inspect threads and sealing faces: Replace damaged components — cracked or cross-threaded fittings can fail under pressure.

• Pressure test gradually after installation: Start at low pressure, check for leaks, then increase slowly to operating pressure.

ASAB – Engineered for Performance, Built to Last.