ASAB High Pressure Fittings #7 - Replacement Swivel Nut | 1/4"M x 3/8"F | 5000psi

Part Code: ASAB-F-HPF07

Introducing the ASAB-F-HPF07 5000 PSI 1/4" Male x 3/8" Female Swivel Nut — engineered to provide a secure high-pressure connection while allowing controlled swivel movement to reduce hose twist and fitting strain. Designed for professional airless spray systems, this fitting is ideal where your setup needs flexibility during operation without compromising sealing integrity.

Rated to 5000 PSI, the swivel action allows the connected hose or accessory to rotate naturally as the operator moves, helping prevent binding, kinking, and thread fatigue. This reduces wear on connections and supports consistent pressure delivery — especially in gun/whip/hose setups where movement is constant.

Whether you’re configuring a new rig, adapting mixed-size connections, or replacing a worn fitting, the ASAB swivel nut is a reliable, job-site-ready solution for high-pressure airless work.

Key Benefits

• Rated to 5000 PSI for high-pressure airless applications

• 1/4" Male x 3/8" Female configuration for versatile system connections

• NPT thread for secure, tapered sealing on compatible high-pressure fittings

• Swivel design helps reduce hose twist, kinking, and fitting stress

• Supports consistent sealing integrity during movement

• Durable construction for commercial job site use

• Ideal for guns, whips, extensions, and hose setups

What’s Included

• ASAB 5000 PSI Swivel Nut 1/4" M x 3/8" F (NPT) — ASAB-F-HPF07

Safety Check

• Depressurise fully before fitting changes: Switch to prime/relief, trigger the gun into a waste bucket, and confirm pressure is at zero.

• High-pressure injection hazard: Never check leaks with your hand—use cardboard or a rag and keep clear of pressurised joints.

• Match thread types correctly: Confirm mating components are the correct NPT sizes (don’t mix NPT with BSP/NPSM).

• Pressure rating matters: Ensure every connected hose/fitting is rated to 5000 PSI (or higher).

• Inspect threads and sealing faces: Replace damaged fittings immediately—cross-threaded or cracked components can fail under pressure.

• Test gradually after install: Start at low pressure, check for leaks, then increase slowly to operating pressure.

ASAB – Engineered for Performance, Built to Last.