ASAB High Pressure Fittings #9 - Replacement Swivel Nut | 3/8"M x 3/8"F | 5000psi

Part Code: ASAB-F-HPF09

Introducing the ASAB-F-HPF09 Swivel Nut — engineered to restore secure, high-pressure connections while allowing controlled swivel movement to reduce hose twist and fitting strain. Designed for professional airless spray systems, this replacement swivel nut is ideal for servicing worn or damaged swivel assemblies and keeping your setup operating safely under pressure.

Rated to 5000 PSI, the swivel design allows the hose or accessory to rotate naturally during spraying, helping prevent binding, kinking, and thread fatigue. This reduces stress on fittings, supports consistent sealing integrity, and helps extend the service life of hoses and connected components — especially in high-movement gun and whip setups.

Whether you’re rebuilding a fitting, replacing a damaged swivel, or upgrading reliability on site, the ASAB-F-HPF09 is a job-ready solution for high-pressure airless work.

Key Benefits

• Rated to 5000 PSI for high-pressure airless applications

• 3/8" Male x 3/8" Female configuration for common high-pressure connections

• NPT thread for secure, tapered sealing on compatible high-pressure fittings

• Replacement swivel nut design for servicing and restoring fittings

• Swivel action reduces hose twist, kinking, and fitting stress

• Supports consistent sealing integrity during movement

• Durable construction for commercial job site use

What’s Included

• ASAB Replacement Swivel Nut 3/8" M x 3/8" F – 5000 PSI (NPT) — ASAB-F-HPF09

Safety Check

• Depressurise fully before fitting changes: Switch to prime/relief, trigger the gun into a waste bucket, and confirm pressure is at zero.

• High-pressure injection hazard: Never check leaks with your hand—use cardboard or a rag and keep clear of pressurised joints.

• Match thread types correctly: Confirm mating components are 3/8" NPT (don’t mix NPT with BSP/NPSM).

• Pressure rating matters: Ensure every connected hose/fitting is rated to 5000 PSI (or higher).

• Inspect threads and sealing faces: Replace damaged components—cross-threaded or cracked fittings can fail under pressure.

• Test gradually after install: Start at low pressure, check for leaks, then increase slowly to operating pressure.

ASAB – Engineered for Performance, Built to Last.