ASAB High Pressure Fittings #6 - Replacement Swivel Nut | 1/4"M x 1/4"F | 5000psi

Part Code: ASAB-F-HPF-06

Introducing the ASAB-F-HPF-06 5000 PSI 1/4" Male x 1/4" Female Swivel Nut — engineered to provide a secure, high-pressure connection while allowing controlled swivel movement to reduce hose twist and fitting strain. Designed for professional airless spray systems, this fitting improves reliability in setups where guns, whips, extensions, or hose runs are constantly moving during use.

Rated to 5000 PSI, the swivel design helps prevent binding and kinking by allowing the connected hose or accessory to rotate naturally as the operator moves. This reduces wear on threads, minimises stress on connections, and helps maintain sealing integrity under load — especially on long spraying days where the hose wants to “wind up”.

Ideal for new installs, repairs, or system upgrades, the ASAB swivel nut is a practical addition to any high-pressure airless setup.

Key Benefits

• Rated to 5000 PSI for high-pressure airless applications

• 1/4" Male x 1/4" Female configuration for versatile system connections

• NPT thread for secure, tapered sealing on compatible high-pressure fittings

• Swivel design helps reduce hose twist, kinking, and fitting stress

• Supports consistent sealing integrity during movement

• Durable construction for commercial job site use

• Ideal for guns, whips, extensions, and hose setups

What’s Included

• 1x ASAB 5000 PSI Swivel Nut 1/4"M x 1/4"F — ASAB-F-HPF-06

Safety Check

• Depressurise fully before fitting changes: Switch to prime/relief, trigger the gun into a waste bucket, and confirm pressure is at zero.

• High-pressure injection hazard: Never check leaks with your hand—use cardboard or a rag and keep clear of pressurised joints.

• Match thread types correctly: Confirm all mating components are 1/4" NPT (don’t mix NPT with BSP/NPSM).

• Inspect seals and threads: Replace damaged fittings immediately—cross-threaded or cracked components can fail under pressure.

• Test gradually after install: Start at low pressure, check for leaks, then increase slowly to operating pressure.

ASAB – Engineered for Performance, Built to Last.