ASAB Pneumatics - Extreme 68-70:1 Heavy Duty Pneumatic Sprayer

Part Code: ASAB-X180CCR

Introducing the ASAB Extreme 68–70:1 Heavy Duty Pneumatic Sprayer — a serious high-ratio air-powered unit built for heavy coatings and high-pressure applications where standard airless gear just doesn’t have the grunt. Designed for professional contractors and industrial coating crews, the X180CCR delivers the pressure multiplication you need for high-viscosity materials, long hose runs, and demanding spray conditions while keeping the drive system pneumatic for reliability in harsh environments.

With a 68–70:1 ratio, this sprayer converts plant air into ultra-high fluid pressure for coatings such as high-build epoxies, zinc-rich primers, protective systems, and other thick industrial materials (material suitability depends on setup, temperature, and hose/tip selection). It’s a solid choice for workshops and sites chasing consistent atomisation, stable delivery under load, and a rig that’s built to take punishment.

Whether you’re setting up for production coating, heavy protective work, or upgrading an ageing high-ratio system, the ASAB-X180CCR is a job-site-ready solution for serious pneumatic spraying.

Key Benefits

• 68–70:1 ratio for ultra-high pressure fluid delivery from plant air

• Built for heavy-duty industrial coatings and high-viscosity materials

• Pneumatic drive for reliable operation in tough site conditions

• Helps maintain consistent atomisation on long hose runs and demanding setups

• Heavy-duty build suited to commercial/industrial duty cycles

• Ideal for protective coating work where pressure stability matters

• Service-friendly platform for workshop maintenance and long-term uptime

What’s Included

• ASAB Extreme 68–70:1 Heavy Duty Pneumatic Sprayer — ASAB-X180CCR

Safety Check

• High-pressure injection hazard: Treat this as ultra-high pressure equipment. Never point the gun at skin and never check leaks with your hand — use cardboard/rag and keep clear of joints.

• Depressurise correctly before servicing: Shut air supply, bleed system pressure, trigger into a waste bucket, and confirm fluid pressure is at zero before opening any fittings.

• Air supply safety: Use a suitable regulator/FRL and bring air pressure up gradually—don’t slam it on.

• Grounding is mandatory: Ensure pump, hose, gun, and workpiece are correctly grounded to reduce static ignition risk (especially with solvents).

• Hose/fitting ratings: Confirm every hose, whip, fitting, and filter in the system is rated for the maximum working pressure of a 70:1 setup.

• PPE: Eye protection, gloves, and respiratory protection appropriate to the coating/SDS—industrial coatings can be nasty stuff.

ASAB – Engineered for Performance, Built to Last.